China PVDF Membrane Pleated Filter Cartridge/Filter Element for solvent filtration
Innovation, top quality and reliability are the core values of our company. These principles today extra than ever form the basis of our success as an internationally active mid-size company for China PVDF Membrane Pleated Filter Cartridge/Filter Element for solvent filtration, We have been normally seeking forward to forming profitable company relationships with new clientele around the environment.
Innovation, top quality and reliability are the core values of our company. These principles today extra than ever form the basis of our success as an internationally active mid-size company for TS made cheap PVDF pleated filter, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
◆Hydrophobic PVDF membrane for gas and solvents sterile filtration
◆Absolute rating, filtration effective is ≥99.99%, Minimum micron to 0.01um for Air
◆Wide Chemical compatability, low protein binding
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Fermentation air,
•Tank vent;
•Compressed air,
•Sterile filtration of aggressive solvents/gases
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PVDF Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉) Cumulative Time: 50hours |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | DPV | 020-0.2um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F-FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| H-Chemical | 100-1.0um | BN-222/FIN | 30-30″ | V-viton | ||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PDPV045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Innovation, top quality and reliability are the core values of our company. These principles today extra than ever form the basis of our success as an internationally active mid-size company for China PVDF Membrane Pleated Filter Cartridge/Filter Element for solvent filtration, we have been normally seeking forward to forming profitable company relationships with new clientele around the environment.
TS made cheap PVDF pleated filter, we focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products and solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
